1 of 1 101199 features low-cost holder for 16.3 mm microcan printed circuit board mount contacts are 302 spring stainless steel flammability rating: ul94v-o two versions: - DS9094f for f5 microcan (flanged rim, 5.8 mm high) - DS9094fs for surface mounting f5 microcan (flanged rim, 5.8 mm high) printed circuit contacts are selectively tin- lead plated for improved solderability pc board mounting details description the DS9094 i button clip holds an i button and connects to a printed circuit board. by deflecting the spring clip in the molded housing, an i button can be inserted and extracted without special tools. if reverse insertion is attempted, the beveled edge on the housing prevents contact. note: due to the large variation of cycles and temperatures in reflow ovens, it is recommended to experiment with this clip first before using it in production. if guaranteed compliance with the reflow soldering process is required , the ds9098 i button retainer should be preferred. DS9094 i button tm clip www.dalsemi.com all dimensions are in millimeters.
|